Tunnel & Underground Concrete Cleaner
Available in multiple bulk and commercial sizes.
Cleans dust, mud infrastructure contamination.
Suitable for tunnel walls and concrete infrastructure.
Removes soot, carbon and exhaust-related deposits.
Breaks down accumulated traffic film and oily grime.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A heavy-duty industrial cleaning solution developed for removing accumulated soot, carbon deposits, traffic film, exhaust residue, dust, mud and stubborn operational grime from tunnel walls, underground concrete structures, service passages and subterranean infrastructure. Its powerful cleaning and degreasing action helps break down accumulated traffic-related contamination and atmospheric deposits from compatible concrete surfaces, supporting infrastructure maintenance, tunnel washing operations and improved surface cleanliness in heavily trafficked underground environments.
Light dust and dirt: | 30–50 ml per litre of water. |
General traffic grime: | 50–100 ml per litre of water. |
Heavy soot and oily deposits: | 100–200 ml per litre of water. |
Remove loose dust and debris before application. Dilute the product according to the contamination level and apply uniformly using suitable low-pressure spray equipment or mechanical washing systems. Allow sufficient contact time for soot, traffic film and oily deposits to loosen without allowing the solution to dry. Agitate heavily contaminated areas using suitable brushes or mechanical scrubbers, then rinse thoroughly with clean water or recover the cleaning solution using industrial wet-vacuum equipment. Ensure adequate ventilation, traffic isolation and electrical safety during cleaning operations. Collect and dispose of contaminated wastewater according to applicable environmental requirements.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.