Trailer Hitch & Coupler Rust Remover
Available in multiple bulk and commercial sizes.
Supports trailer hitch maintenance and refurbishment.
Prepares compatible metal for protective coatings.
Removes surface rust and iron oxide deposits.
Cleans corrosion-affected steel coupling surfaces.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A professional industrial rust removal solution developed for cleaning surface corrosion, iron oxide deposits and oxidation staining from compatible ferrous metal surfaces of trailer hitches, coupling assemblies and towing equipment. Its targeted cleaning action helps loosen rust buildup on exposed steel coupling components, hitch frames, mounting brackets and other suitable metal surfaces, supporting equipment maintenance, refurbishment and corrosion-control operations. Suitable for commercial transport fleets, trailer maintenance workshops, logistics operators and towing equipment service facilities.
Heavy rust deposits: | Undiluted |
Moderate rust deposits: | 1:2 |
Light rust staining: | 1:4 |
Remove loose dirt, grease and flaky rust from the affected surfaces. Apply the product evenly over rust-affected metal areas using a suitable brush or chemical-resistant sprayer. Allow 5–10 minutes of contact time, keeping the surface wet throughout the treatment. Agitate stubborn rust deposits using a suitable wire brush or scrubbing pad. Remove loosened rust and chemical residues by rinsing thoroughly with clean water. Dry the treated metal surfaces completely and apply a suitable anti-corrosion coating to protect against further rust formation. Keep the product away from coupling locking mechanisms, lubricated joints, bearings and moving contact surfaces.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.