Rust Stain & Corrosion Deposit Remover
Available in multiple bulk and commercial sizes.
Restores a cleaner appearance to compatible surfaces.
Suitable for marine and offshore maintenance operations.
Removes rust stains and iron oxide marks.
Cleans corrosion-related surface deposits.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A specialized marine maintenance cleaning solution developed for removing rust staining, iron oxide marks and corrosion-related deposits from compatible metal surfaces and suitable hard marine surfaces. Its targeted cleaning action helps dissolve and loosen rust stains caused by prolonged exposure to moisture, seawater and environmental conditions, restoring a cleaner surface appearance on compatible ship structures, metal fittings, equipment housings and marine installations. Suitable for periodic cleaning and maintenance of corrosion-stained surfaces.
Light rust staining: | 50–70 ml per litre of water. |
General rust stain removal: | 100–120 ml per litre of water. |
Heavy corrosion deposits: | 150–200 ml per litre of water. |
Remove loose dirt and surface contamination before application. Prepare the cleaning solution according to the degree of staining and the surface material. Apply evenly using a suitable brush, sponge or acid-resistant applicator. Allow approximately 3–10 minutes of contact time, monitoring the surface during treatment. Gently agitate stubborn stains and rinse thoroughly with clean water. Neutralize where required by the formulation and dry metal surfaces promptly to reduce flash-rusting.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.