Rebar & Reinforcement Steel Flash Rust Remover
Available in multiple bulk and commercial sizes.
Supports steel preparation before construction use.
Suitable for professional rebar maintenance.
Targets light flash rust and surface oxidation.
Helps clean reinforcement steel surfaces.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A specialised industrial metal-cleaning solution developed for removing light surface rust, flash rust and iron oxide contamination from compatible reinforcement bars and construction-grade steel before concrete placement or further surface treatment. Its targeted cleaning action helps remove superficial oxidation and improve the cleanliness of reinforcement surfaces, supporting appropriate steel preparation and quality-controlled construction operations.
Light flash rust: | 50–100 ml per litre of water. |
Moderate oxidation: | 100–150 ml per litre of water. |
Heavier surface rust: | 150–200 ml per litre of water. |
Remove loose rust, dust and contamination before application. Apply the prepared solution evenly over the affected reinforcement bars using a suitable brush or controlled spray system. Allow sufficient contact time for the oxidation to loosen, then brush and rinse as required by the formulation. Ensure that all chemical residues are removed and the reinforcement is appropriately dried before concrete placement or subsequent treatment. Verify compliance with applicable structural engineering and reinforcement specifications.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.