Mould & Kiln Scale Remover
Available in multiple bulk and commercial sizes.
Cleans compatible moulds and kiln equipment surfaces.
Supports maintenance of construction material.
Removes accumulated mineral and lime scale deposits.
Helps loosen stubborn inorganic production residues.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A specialised industrial descaling solution developed for removing accumulated mineral scale, lime deposits, cementitious residue and inorganic processing buildup from compatible construction moulds, industrial kilns, curing chambers and associated production equipment. Designed for precast concrete manufacturing, construction material processing and building-product production facilities, it helps loosen stubborn scale and mineral deposits from suitable equipment surfaces, supporting effective equipment maintenance, cleaner production environments.
Light mineral deposits: | 50–100 ml per litre of water. |
General scale buildup: | 100–150 ml per litre of water. |
Heavy deposits: | 150–250 ml per litre of water. |
Shut down, isolate and completely cool the mould, kiln or curing equipment before cleaning. Remove loose deposits and accumulated debris from the affected surfaces. Prepare the descaling solution according to the type and thickness of the deposits and apply using suitable chemical-resistant equipment. Allow sufficient contact time for the scale to loosen without allowing the product to dry. Agitate stubborn deposits using suitable brushes or approved mechanical cleaning equipment. Remove the loosened material and rinse thoroughly with clean water where the equipment design permits. Allow the equipment to dry completely before returning it to service. Verify compatibility with refractory linings, ceramic components, mould coatings, heating elements and metal surfaces.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.