Evaporator & Freshwater Generator Descaler
Available in multiple bulk and commercial sizes.
Removes deposits from compatible heat-transfer surfaces.
Supports freshwater generator maintenance and efficiency.
Dissolves accumulated mineral and calcium scale.
Helps restore clean water-flow passages.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A specialized industrial marine descaling solution developed for removing accumulated mineral scale, calcium carbonate deposits and hard-water scale from compatible evaporator units, freshwater generators, heat-transfer surfaces, condenser passages and associated water-circulation components. Its targeted descaling action helps dissolve mineral deposits that restrict water flow and reduce heat-transfer efficiency, supporting effective equipment cleaning and maintenance. Suitable for controlled descaling operations in marine freshwater production and thermal processing systems.
Light mineral scale: | 50–70 ml per litre of water. |
General descaling: | 100–150 ml per litre of water. |
Heavy mineral scale: | 150–200 ml per litre of water. |
How To Use: Shut down, isolate and completely cool the evaporator or freshwater generator before beginning the descaling operation. Drain the equipment and carry out an initial fresh-water flush to remove loose deposits. Prepare the descaling solution using the recommended dilution and introduce it through a compatible circulation or CIP system. Circulate uniformly through the affected passages while monitoring the solution condition, temperature and cleaning progress. Drain the spent solution, rinse thoroughly with fresh water and neutralize where required by the formulation and equipment manufacturer's instructions. Verify that the system is free from residual cleaning chemicals before returning it to service.
Important: Confirm compatibility with heat-exchanger metals, copper-nickel alloys, aluminium-brass components, seals and internal coatings before use. Do not use on incompatible metals. Never mix acidic descalers with hypochlorite or chlorine-based chemicals.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.