Engine Room Bilge & Sludge Degreaser
Available in multiple bulk and commercial sizes.
Cleans machinery spaces and bilge surfaces.
Facilitates removal of stubborn oily contamination.
Cuts through heavy oil, grease and sludge deposits.
Loosens accumulated fuel and lubricant residues.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A professional-grade marine degreasing compound designed for removing accumulated fuel residues, lubricating oil, hydraulic oil, grease, sludge and oily contamination from engine room bilges, machinery spaces, engine foundations and compatible equipment surfaces. Its emulsifying and degreasing action helps penetrate heavy oily deposits, loosen adhered sludge and facilitate their removal during cleaning and maintenance operations. Suitable for routine engine room housekeeping, machinery maintenance and marine industrial degreasing.
Routine bilge cleaning: | 30–50 ml per litre of water. |
General degreasing: | 70–100 ml per litre of water. |
Heavy oil and grease deposits: | 100–150 ml per litre of water. |
Extremely heavy sludge contamination: | 150–200 ml per litre of water. |
Remove excess free oil and loose sludge before commencing cleaning. Dilute the product with water according to the level of contamination. Apply by low-pressure spray, brush or controlled manual application to the affected surfaces. Allow 10–20 minutes of contact time and agitate heavily contaminated areas. Collect the loosened oily waste and cleaning solution using suitable recovery equipment. Rinse where required and dispose of collected waste in accordance with applicable shipboard waste-management and MARPOL requirements.
Important: Do not discharge oily cleaning waste directly into the sea or assume that the product is compatible with an oily-water separator.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.