Engine Carbon & Soot Deposit Remover
Available in multiple bulk and commercial sizes.
Cleans compatible engine metal components.
Supports engine maintenance and refurbishment.
Loosens stubborn carbon and soot deposits.
Removes baked-on combustion-related contamination.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A specialized industrial cleaning compound developed for removing stubborn carbon deposits, soot accumulation, combustion residues and baked-on oily contamination from compatible marine engine components and associated metal surfaces. Its targeted cleaning action helps penetrate and loosen hardened carbonaceous deposits, supporting the cleaning of exhaust-side components, engine housings, metal fittings and maintenance equipment. Suitable for controlled engine maintenance and refurbishment operations where conventional degreasing agents are insufficient.
Light carbon and soot deposits: | 50–70 ml per litre of water. |
General carbon removal: | 100–120 ml per litre of water. |
Heavy baked-on deposits: | 150–200 ml per litre of water. |
Ensure the engine is shut down, isolated and completely cooled before cleaning. Remove loose carbon and accumulated debris using suitable mechanical methods. Prepare the cleaning solution at the recommended dilution and apply by controlled brushing, soaking or spraying, depending on the component and approved cleaning procedure. Allow sufficient contact time for the deposits to soften. Agitate stubborn areas using a suitable brush and rinse thoroughly where required. Dry the components completely before reassembly or returning them to service.
Important: Not intended as a universal internal engine or combustion-chamber cleaner. Check compatibility with aluminium alloys, copper alloys, coatings, seals and sensitive engine components before application.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.