Engine Air Cooler & Turbocharger Cleaner
Available in multiple bulk and commercial sizes.
Loosens carbonaceous and combustion-related residues.
Supports engine air-system maintenance operations.
Removes oily deposits from air cooler passages.
Helps maintain clean heat-transfer surfaces.
Free from phosphates, parabens & harsh solvents
Low-toxicity, No harsh chemicals or toxic fumes
A high-performance, eco-friendly product
Bio-based, biodegradable surfactants
A specialized industrial marine cleaning compound developed for removing oil mist deposits, carbonaceous contamination, oily sludge and accumulated combustion-related residues from compatible diesel engine air coolers, charge-air coolers, scavenging air systems and turbocharger air-side components. Its targeted cleaning action helps loosen adhered contamination from air passages and heat-transfer surfaces, supporting improved cleanliness, airflow and heat-transfer performance. Designed for controlled maintenance cleaning of compatible engine components.
Routine maintenance cleaning: | 30–50 ml per litre of water. |
General deposit removal: | 70–100 ml per litre of water. |
Heavy oily contamination: | 100–150 ml per litre of water. |
Extremely heavy deposits: | 150–200 ml per litre of water. |
Shut down and isolate the engine or follow the engine manufacturer's approved in-service cleaning procedure. Allow the equipment to reach the prescribed cleaning temperature and ensure that the cleaning system is properly configured. Prepare the cleaning solution using the recommended concentration and apply through the designated cleaning or dosing arrangement. Allow sufficient contact time for the deposits to loosen, then rinse thoroughly with clean fresh water wherever required by the equipment manufacturer's procedure. Ensure complete drainage and drying before returning the equipment to service.
Important: This is an external air-side cleaning recommendation, not a universal turbocharger or compressor internal-cleaning instruction. Use only where approved by the engine manufacturer. Do not apply indiscriminately to compressor bearings, electrical components or lubricated assemblies. Actual dilution must be validated against the formulation and equipment instructions.
Keep out of reach of children. Store <30°C, sealed, away from sunlight. Keep container closed after use. Wear protective gloves and glasses while handling. Do not mix with bleach or other cleaners. Use in a well-ventilated area. Test on an inconspicuous area before use. Do not reuse the bottle for food or beverages. Dispose of empty bottle in recycling bin. If swallowed accidentally, drink water and seek medical help. Avoid contact with eyes; if contact occurs, rinse thoroughly with water. Formulations may naturally change color, Viscosity over time; however, this does not affect the product’s efficacy or performance.
FOR EXTERNAL USE ONLY.